Introduction

DFI has built a leadership in the global market that spans 23 years.With this experience DFI has reached milestones that have proven track records of success by spearheading the development of leading edge standards.

To augment those standards DFI has taken notice of the consumer enthusiasts who enjoy LAN gaming and has answered there call with the proven LANParty Series. Continuing the tradition, DFI has blessed the gaming community with there latest Flagship design.

The LANParty 925X-T2

Designed for the new Intel LGA 775 platform, the LANParty 925X-T2 features Intel 925X / ICH6R chipset and features supports for the new DDRII memory in dual channel mode.

Proliferating 16-pipe PCI-Express video cards, 2+1 1x PCI Express connector slots for future PCI-E based devices. Proprietary 8-channel Karajan high definition audio, dual Gigabit (PCI + PCI-E) LAN, Serial ATA Matrix RAID, USB 2.0, and IEEE 1394 Firewire ports.

Our LANParty will be topped off with a genuine Intel Pentium 4 550 LGA 775 3.4GHz CPU. This CPU is a D0 stepping CPU and the multiplier locked at a 17. Thus 17 times the FSB (Front Side Bus) will give you the CPU's Clock Speed. Arriving to the conclusion of 17 x 200 FSB = 3.4GHz.

Getting Familiar with the LANParty 925X-T2

Specifications

• Processor
• Intel® Pentium® 4 Prescott processor
  - Hyper-Threading Technology
  - 800MT/s (200MHz) system bus interface
• Socket LGA 775 (LAN Grid Array)
• Chipset
• Intel® 925X chipset
• Intel® 925X Memory Controller Hub (MCH)
• Intel® 82801FR I/O Controller Hub (ICH6R)
• System Memory
• Four 240-pin DDR2 DIMM sockets
• Supports dual channel (128-bit wide) memory interface
• Supports up to 4GB system memory
• Supports DDR2 400 and DDR2 533 DIMMs
• Supports ECC (x8) only or non-ECC x8 and x16 DIMMs
• Support for 256MB and 512MB DRAM densities
• Supports Performance Acceleration Technology
• Supports unbuffered DIMMs
• BIOS
• Award BIOS
• Genie BIOS provides:
  - CPU/DRAM overclocking
  - CPU/NB/DRAM overvoltage
• Supports SCSI sequential boot-up
• Supports DMI 2.0 function
• 4Mbit flash memory
• Energy Efficient Design
• Supports ACPI specification and OS Directed Power
  Management
• Supports ACPI STR (Suspend to RAM) function
• Wake-On-Events include:
  - Wake-On-PS/2 Keyboard/Mouse
  - Wake-On-USB Keyboard/Mouse
  - Wake-On-Ring (external modem)
  - Wake-On-LAN
  - RTC timer to power-on the system
• AC power failure recovery
• Hardware Monitor
• Monitors CPU/system temperature and overheat alarm
• Monitors 12V/5V/3.3V/Vcore/Vbat/5Vsb/3.3Vsb voltages
• Monitors the speed of the CPU/system fan
• CPU Overheat Protection function monitors CPU temperature and fan during system boot-up - automatic shutdown upon system overheat
• Onboard Audio Features
• Azalia audio codec with independent variable sampling rate
• True stereo line level outputs
• S/PDIF-in/out interface
• 8-channel audio output
• Onboard LAN Features
• Gigabit ethernet controllers - Marvell 88E8053 PCI Express and Marvell 88E8001 PCI
• Integrated power management functions
• Full duplex support at both 10 Mbps, 100 Mbps and 1Gbps
• Supports IEEE 802.3u auto-negotiation
• Supports wire for management
• Serial ATA Interface with RAID
• Supports four SATA (Serial ATA) interfaces which are compliant with SATA 1.0 specification (1.5Gbps interface)
• Supports RAID 0, RAID 1 and JBOD
• IEEE 1394 Interface
• Supports two 100/200/400Mb/sec ports
• IDE Interface
• Supports ATA/33, ATA/66 and ATA/100 hard drives
• Rear Panel I/O Ports
• 1 mini-DIN-6 PS/2 mouse port
• 1 mini-DIN-6 PS/2 keyboard port
• 2 S/PDIF RCA jacks (S/PDIF-in and S/PDIF-out)
• Karajan audio card (6 audio jacks)
• 1 IEEE 1394 port
• 2 RJ45 LAN ports
• 6 USB 2.0/1.1 ports
• I/O Connectors
• 1 connector for 2 additional external USB 2.0/1.1 ports
• 1 connector for 1 external IEEE 1394 port
• 1 connector for 1 external serial port
• 1 front audio connector for external line-out and mic-in jacks
• 1 CD-in internal audio connector
• 1 S/PDIF connector for optical cable connection
• 1 IR connector
• 1 CIR connector
• 4 Serial ATA connectors
• 1 IDE connector
• 1 floppy connector
• 2 ATX power supply connectors
• 5 fan connectors
• 4 diagnostic LEDs
• 1 diagnostic LED connector for external 4 diagnostic LEDs
  display
• EZ touch switches (power switch and reset switch)
• Expansion Slots
• 1 PCI Express x16 slot
• 3 PCI Express x1 slots
• 3 PCI slots
• Compatibility
• PCI 2.2 and Azalia compliant
• PCB
• 6 layers, ATX form factor
• 24.5cm (9.64") x 30.5cm (12")