Innovatek - RADI - Dual - 240er

The Innovatek RADI Dual has the maximum cooling performance for large cooling system and is an optimal solution for over clocked systems. It accepts two 120mm fans that can be of any manufacturer allowing you to customize the performance to suit your needs. Our kit came with arguably the best fans available - premium Papst active cooling fans, we'll check those out in a few. Like all Innovatek products, it is designed for usage with only their 8mm tubing and fittings and comes with two screw-in 8mm ID/10mm OD compression fittings.

The fine lamination of the radiator provides optimal heat transition to the air without significantly reducing the air flow. Furthermore, the air flow of the fans is optimized by the integrated steel fan housing that directs the air across the whole surface of the radiator. Additionally it reduces internal air disruptions thereby reducing the noise. The fans can be mounted to the front or back of the radiator and the radiator can be mounted in numerous positions on the computer case.

Specifications

• Weight: ca. 1000g
• Dimensions: 320 x 145 x 145 mm
• Mounting: Steel enclosure with pre-drilled holes
• Connections: 2 compression fittings for 8mm ID/10mm OD tubing

While radiators frequently look the same on the exterior, the interior of Innovatek radiators differs substantially from the rest. Innovatek uses an expensive manufacturing process so that the entire radiator is one casting. There isn't any physical separation from the fins and the discharge ports as the entire radiator is manufactured at once. This creates a highly efficient and durable design that is exclusive to Innovatek radiators.

Included with the Innovatek SET R4D bundle, are two high performance fan which kicks out an astounding 61.1 CFM at only 32 dBA. Papst's legendary high performance fans are notoriously difficult to acquire. Innovatek certainly knows what is best for their water-cooling kit. Each fan spins at 2400 RPM and can run at 12 volt or 7 volt for ultra quiet operations. This fan move 114 cubic meters of air in one hour and includes a 3-pin connector which includes a wire for tachometer signal.

Each Papst 120mm fan comes with a metal grill and accessories for easy mounting. A nice feature Innovatek included was the choice of fasteners. Plastic expansion rivets and steel screws are included for user convenience.