Continued...

On the left side we have the MCW5002-64T™ liquid-cooled thermoelectric assembly with neoprene sponge gaskets, nylon spigots, clamps and mounting hardware. On the right a close up of the Luberex Dielectric grease we mentioned earlier.

The conformal coating is a aerosol spray and easy to use. You will only use a fraction of the cans contents as you only need several coats. The bubble wrap contains the wiring harness with pre-attached relay switch that actives the included PSU. Also included is 5.25" mounting brackets for that PSU, a power cord, power outlet with socket and mounting screws.

This is the MCR120-FB 120 mm radiator up close sitting next to the MCP655 pump. Both boxes contain all mounting hardware and screws. The pump box contains an installation guide, metal fasteners, worm clamps and neoprene vibration control gasket for mounting the pump with the included nuts and bolts.

The MCR120-FBRB Radiator/RadBox and Meanwell S320 power supply right out of the box and up close. The Meanwell power supply is perfect for powering the 226 watt TEC and stuffs nicely in any drive bay on most modern chassis designs.

Inside the bubble wrapped RadBox and radiator you will find copper pass-thru tubes, brackets and bolts along with clamps and everything needed to mount the RadBox and Radiator to a chassis as seen with the above pictures.

Close up shot of the MCRES-525™ 5 1/4" Drive bay reservoir and the Coil Sleeves which help prevent the water circuit tubes from kinking and adds a cool look to the water tubes as seen on our previous review we provided from Swiftech.

Here we have another shot the electrical components in bubble wrap and the MCRES-525™ 5 1/4" Drive bay reservoir accessories in the zip lock labeled DP-11.

Ok now that we bored you with the box contents, let's move on to unpacking and checking out the hardware and start installing this kit.