Accessories:

• Side panel key
• Front door key
• 8 Tool-Free 5.25" device rails
• 5 Tool-Free HDD locking devices
• 2 3.5" locking devices
• A Manual
• Jewelers cloth
• Nipples, screws, tie wrap

Thermaltake includes all the necessary hardware to make your installation a breeze. You will get motherboard nipples, motherboard and device fasteners. What you will also get are these cool proprietary tool-free system with press fit device guide rails. Also included are these very simple yet effective lock devices that allow you to quickly unlock any device in seconds. Let’s take a closer look at these lock devices.

You will have Left and Right side rails for each peripheral you want to install inside the 5.25" drive bay area. These also offer some vibration and noise reduction do to the plastic composite material used.

Looking carefully at the front of the rails you will see the area that is marked with "L" and "R". This reflects the left or right rail. With the device facing towards you, one would naturally put the right rail on the right and side and the left rail on the left side. I am sure we get the point...

Here are the five HDD locking devices that is included with the Soprano. These devices are cool and are super easy to use. I haven't seen such a unique design locking devices in a long time. The devices are labeled HDD and show you the locked and un-locked positions for user convenience.

Last but not least, we have the 3.5" locking devices that will facilitate quick and easy installation and removal of any floppy drive or most any 3.5" device. Just line up the pin-outs to the device, press and lock the device in place with the green locks. Clockwise locks the devices in place and counter-clockwise un-locks the devices.

Factory Specifications: