Godzaghe
User
 Junior Boarder
| Posts: 10 |   | Karma: 0
|
BFG GeForce 8800 GT OC, with no boot and display outputs? - 2008/05/28 17:53
Hi, as the subject says suppose, I set everything up, turned the PC on but it doesn't turn the monitor on from power saving mode. When I turn it on the blue light is on for about 5 seconds then goes back into power saving mode. The graphics card is running as the fan can be heard at 100%. The monitor is using the VGA input, with a DVI-D option. I have read of people with the same problem but no solution comes up.
Also the machine isn't booting up as the busy light isn't flashing and no noise when it would be entering Windows Vista. I have an Arctic Cooling 700W power supply with 22Amps from the 12V rails, so it can't be the power. I am using the Packard Bell PT890-8237A motherboard, so it's in a PCI Express slot, which version I don't know but it shouldn't matter. Any ideas and I would be hugely grateful, thanks a lot.
|