DarkFox
User
 Senior Boarder
| Posts: 206 |   | Karma: 9
|
Re:Restoring the XFX GeForce 8800 GTX board's original BIOS? - 2008/04/20 07:23
It is probably booting, but you just get no signal. You did plug the monitor into the PCI card right? Right... If all else fails, create a file called "autoexec.bat" on the disk you have nvFlash on it and put the below command line into the file. "nvflash.exe -4 -5 -6 -a -y filename.rom"
After that reboot your PC with that disk in. Make sure you are booting from the floppy first. I suggest you remove your PCI card when you do this just in case. Give it a minute or two to make sure it's done and reboot again.
|