skyliner
User
Junior Boarder
| Posts: 91 |   |
Karma: 2
|
My new rig! - 2006/09/10 23:20
Finally my new system is up and running.... with a little problem!Motherboard is
Gigabyte's GA-965P-DS4, processor Intel's new family kid Core 2 Duo E6600,
VGA my older Albatron 7900GTX, hard disk from WD 320GB SATAII 16MB, soundcard Creative's Soundblaster X-Fi Fatality and finally RAM from OCZ.I want to focus on memory as with this I have the problem.I just bought for my new system two 512MB sticks DDRII 800Mhz of RAM from OCZ.If I put only those 800Mhz RAM the system didn't boot.It starts but before "read" BIOS restarts again and again 'till I press for 4 sec power button for the system to turn off.Now if I put together my older system memory, two 512MB sticks DDRII 677Mhz again from OCZ the system runs ok but the memory only at 533Mhz.I also try to manualy "clock" only my new 800Mhz memory but then I had a complete freeze system and I had to clear CMOS for it to restart.Does someone
knows something or can help me with this.Please reply.Thank you people.
|
ASUS 9800GTX+ (DK) PCIe 512MB - Rev 01
