Dutchess
User
Fresh Boarder
| Posts: 8 |   |
Karma: 0
|
Re:GTX 560m BIOS attached - Can you increase the voltage please? - 2011/11/10 15:59
Mavke wrote:
Have you checked the temps when the throttle is happening? Raising the voltage on the low power 3D mode won't make a difference cause if it throttles it will also switch to those lower clock speeds. And raising both the voltage and clock speed isn't a good idea unless you find out in what conditions the throttling is happening.
Well some applications under which Furmark initiates a power limiter to kick in, this power throttling and don't confuse with thermal throttling that kicks in at 79°C is something unwanted we can not control. I have the impression Furmark and other applications are blacklisted by the driver. So what I need is P8 state raised from 0.820V to 1.000 V. We can raise the clocks manually by using software. Could you provide me this modification? Many thanks and cheers. 
|
NiBiTor v6.06
