schotte3
User
 Fresh Boarder
| Posts: 3 |   | Karma: 0
|
Re:GeForce 9500 GT Super+ but no signal until Windows loaded? - 2010/01/07 21:48
ok, I sorted it by doing the following, let me know what you think -
I edited the bios file and checked the options force adaptive scaling, skip DDC scanning and non-native panel control (the other two items were already checked.)
I then ran nvflash under a dos window in Windows 7 (couldnt do it in pure dos as I couldnt get a signal obviously with my problem)
Reboot and voila screen straight from boot up, I can now edit my bios setup etc.
You can post the graphic card bios if you wish into the correct section under Palit 9500 GT super + in case somebody needs it.
|