Re:Inno3D 6600GT AGP - MVKTech Support Forums :: mvk.tech :: NVIDIA GeForce GTX 280 GTX 260 9800 GX2 9600 GT 8800 GTX ATI Radeon HD 4870 HD 4850 HD 3870 X2 HD 3850 2900 XTX

Forums

TreatYouGoods
Camera Digital Cameras Video Cameras

Main Menu

Getprice Comparison
Digital Cameras

Latest Downloads

Nov.30	Galaxy 9800GT PCIe 512MB - Rev 01
Nov.30	XFX 9600GT (X3) PCIe 512MB - Rev 04
Nov.30	XFX GTX260 (BL) PCIe 896MB - Rev 02
Nov.23	ASUS 9800GT+ (MX) PCIe 512MB - Rev 01
Nov.23	Galaxy 8500GT (LP) PCIe 512MB - Rev 01

Price Comparison
Comparison shopping Laptop Tomtom Digital Camera Mobile Phones Ink cartridges VOIP Shopbot NZ Shopbot ZA

Top Downloads

592377	Omega WinXP2k v1.6693
320613	Omega WinXP2k v1.4523a
229357	nvFlash v5.13
224092	NiBiTor v3.2
164094	RaBiT v2.2.1

MVKTech Support Forums

home | post reply | threaded view | help

Boardwalk :: Forum List

NVIDIA Graphics Cards

NVIDIA GeForce BIOS

<< Start < Prev 1 2 3 4 5 6 7 8 9 10 Next > End >>

milch
User

Junior Boarder

Posts: 18

Karma: 0

Re:Inno3D 6600GT AGP - 2005/01/10 02:28 That really sucks. Now I have to clean the GPU again and have to apply silicon. Much of it... the GPU looked terrible... All over a real thick layer of it. I Hope Inno3D doesn't get the clue that I've changed the thermal compound.

Nein, ich bin kein Fachhändler und muss mich erstmal an den Versandshop wenden... Das kann dauern.

| | The administrator has disabled public write access.

fatrat
User

Junior Boarder

Posts: 47

Karma: 3

Re:Inno3D 6600GT AGP - 2005/01/10 02:58 Ruf doch einfach mal bei denen an und red ma mit herrn betz der is der cheffe von Inno3D Germany, frag den ob die auch direkte endkunden abwickelung machen...

| | The administrator has disabled public write access.

datrh
User

Junior Boarder

Posts: 20

Karma: 1

Re:Inno3D 6600GT AGP - 2005/01/11 02:11 I've no troubles to play games with mine except with high overclock sometimes at Doom 3 timedemo. I play a lot of Counter-Strike: source and have no probs.

At normal speed (500MHz GPU & 1000MHz Memory), I've 55fps at timedemo (after 2 runs) (1280x1024, high quality no AA).

Applying Artic Silver let me see a drop of 10°C (around 65-67°C before AS now 55°C) but anyway the last BIOS doesn't let you see real temp. Well the driver cannot read the BIOS info correctly.

It could be nice to compare your GPU Revision and HSI Revisions. You can find the values of my GPU and HSI on the first page...

| | The administrator has disabled public write access.

Mavke
Admin

Admin

Posts: 14226

Karma: 359

Re:Inno3D 6600GT AGP - 2005/01/11 05:10 fatrat wrote:
Edit...
If the new card have a different BIOS, I know who I have to send it.

Well I hope it has a new BIOS which fixes all the issues... And well I am expecting you to send me the BIOS anyway, even if you think it is the same BIOS.

| | The administrator has disabled public write access.

milch
User

Junior Boarder

Posts: 18

Karma: 0

Re:Inno3D 6600GT AGP - 2005/01/12 04:39 I'll check the values and give a feedback.

| | The administrator has disabled public write access.

Mirec
User

Fresh Boarder

Posts: 1

Karma: 0

Re:Inno3D 6600GT AGP - 2005/01/12 16:33 I have an Inno3d 6600GT AGP 128MB as well and there is no way to get higher than 500MHz on the core. Maybe 1.5V to the core would help, is it possible with a BIOS vmod? I tried several BIOSes and still no luck. I think that Inno3D missed some parts when making these cards.

Never ever will I buy Inno3D and I will surely advertise this on other forums. The card runs rather stable at the default scores but I don't get the best results especially in 3DMark2001 (only 14500 - I had 13800 with a 4200TI and like 16000 with a FX5900XT) and Aquamark (42000 - 6600GT , 44000 - FX5900XT). I even get 1500 point lower than with the previous card I had, the MSI GeForce FX5900XT. I did a fresh install of WinXP as well and have the newest chipset and display drivers...

My rig...
- AMD Athlon 1700+ @ 2600+ (200MHz*11)
- 2*256 DDR 400 TwinMos
- Epox 8RDA+ nForce2
- 400Watt PSU

The temps with the original BIOS were 39°C at idle and now I have 50°C with Rev.02, no ambient temp. I applied thermal compound as well. Should I RMA this card or what?

| | The administrator has disabled public write access.

datrh
User

Junior Boarder

Posts: 20

Karma: 1

Re:Inno3D 6600GT AGP - 2005/01/13 06:14 Try to clean also the HSI heatsink and apply Artic silver on it. By default the HSI doesn't receive cool air due to the GPU heatsink design. I've disassembled the CPU heatsink, removing the upper part where the logo of Inno3D stand.

Now the air pushed by the fan can cool a bit the HSI heatsink (the black heatsink). Dunno if this help to overclock but if you check the other post about Inno3D, I've put a link about a review where the sample they get has holes in the GPU heatsink to let fan blow on the HSI heatsink.

These holes don't exist on my heatsink and I guess it's the same for all the Inno3D owners...

| | The administrator has disabled public write access.

milch
User

Junior Boarder

Posts: 18

Karma: 0

Re:Inno3D 6600GT AGP - 2005/01/14 01:01 GPU: N11293.00 0437A2
RAM: SAMSUNG 425 K4J55323QF-GC16
(the last thing is different with every module)

Tomorrow I'm going to send the card back, so I don't remove the HSI heatsink and thermal compound.

By the way...it hurts that I have to put a thick layer silcone on it... And thermal compound glue (dunno if it's the correct expression for this)... The heatsink had glue at two points. Really strange card design!

| | The administrator has disabled public write access.

Mavke
Admin

Admin

Posts: 14226

Karma: 359

Re:Inno3D 6600GT AGP - 2005/01/14 01:13 Well I see you got 1.6ns memory (...-GC16) which means you should be able to clock em at 1200MHz. Well it seems these Inno3D cards are not yet that good. Hopefully the next Revision will be!

| | The administrator has disabled public write access.

milch
User

Junior Boarder

Posts: 18

Karma: 0

Re:Inno3D 6600GT AGP - 2005/01/14 01:19 I know about the RAM...
But I prefer 2.0ns RAM card running stable instead of this shit. And please... I beg you not to blame Inno3D.

Many manufacturers have these problems. Nobody really knows what's causing this, so blame NVIDIA and not a manufacturer! This is my first Inno3D card and it isn't working, but I would never say that Inno3D made the mistake.

| | The administrator has disabled public write access.

<< Start < Prev 1 2 3 4 5 6 7 8 9 10 Next > End >>

Boardwalk :: Forum List NVIDIA Graphics Cards NVIDIA GeForce BIOS

Joomlaboard Forum Component 1.1.2 Stable
Two Shoes M-Factory

Compare Prices
Shopbot.ca LCD TV GPS Digital Cameras Mobile Phones Laptops LCD Monitors MP3 Players Appliances

Online Casino

New Reviews

	Gainward GeForce GTX 260 Standard Version
	Gainward BLISS 9800 GX2 Dual-GPU Version
	PowerColor Radeon HD 3650 Xtreme Cooling
	Dragon Lasers Hulk Green Laser Technology
	Gainward BLISS 8800 GT 1GB Golden Sample

New Previews

	NVIDIA GeForce 9800 GX2 Dual-GPU Version
	PowerColor Radeon HD 3850 Xtreme Edition
	PowerColor Radeon HD 2600 XT 256MB Card

Support Us

Support MVKTech in making a small donation:

MyPMS Professional

Inbox
	You have 0 new message(s).

Joomla! is Free Software released under the GNU/GPL License.