artosoft
User
 Fresh Boarder
| Posts: 9 |   | Karma: 0
|
Re:OC bios for PowerColor x1600pro 512MB AGP - 2006/09/08 08:41
Thanks Raptor,
Yes, I read your review about your Sapphire, and I feel sorry about your card.
But, PowerColor is different from Sapphire. My GPU only max 580.50MHz and Memory max 468MHz (with ATITool v25 beta pre16). The stock Vgpu is 1.29v, and Vmem is 2.03v. The resistance on SMD resistor for pencil mod is very low, only 71ohm for Vgpu, and 682ohm for Vmem. The Vmod looks like a bit difficult and risky for my PowerColor. Also, if Vmod increase VGA card power consumption, I rather not do it, since I am using small form factor with only 220w PSU. I better save power for 3.06GHz CPU (next week on my hand if nothing wrong ).
So, if memory timing from oc bios can make my PowerColor run faster (not in MHz, but in real application), this is best I can do it on my card.
Regards, Arto.
|