NVIDIA GeForce 9800 GX2 9600 GT 8800 GTX 8600 GTS ATI Radeon HD 3870 X2 HD 3850 3650 2900 XTX X1950 XT - MVKTech - Re:NiBiTor v2.9a Feedback...

Home

Forums

Main Menu

Latest Downloads

Jul.01	EVGA 9600GT (SC) PCIe 512MB - Rev 01
Jun.30	Connect3D 4850 PCIe 512MB - Rev 01
Jun.30	TpuGPU-Z v0.2.5
Jun.30	ATI 4870 PCIe 512MB - Rev 01
Jun.30	ASUS 4850 PCIe 512MB - Rev 01

Price Comparison
Comparison shopping Laptop Tomtom Digital Camera Mobile Phones Ink cartridges VOIP Shopbot NZ Shopbot ZA

Top Downloads

590961	Omega WinXP2k v1.6693
320300	Omega WinXP2k v1.4523a
223766	nvFlash v5.13
220437	NiBiTor v3.2
157759	RaBiT v2.2.1

MVKTech Support Forums

home | post reply | threaded view | help

Boardwalk :: Forum List

NVIDIA Graphics Cards

NiBiTor Software Feedback

<< Start < Prev 1 2 Next > End >>

xennon
User

Fresh Boarder

Posts: 0

Karma: 0

Re:NiBiTor v2.9a Feedback... - 2006/06/11 13:14 Hi, this is my 1st post on your cool site. My first and one-and-only problem is with NiBiTor v2.9a, because when I start the program only show its frame and nothing name its card nor voltage, tempeture and I didn't save its BIOS too. My card is a Gainward BLISS 7900 GT PCX Golden Sample 512MB Special Edition. Thank you for your answer...

| | The administrator has disabled public write access.

Delta
User

Junior Boarder

Posts: 34

Karma: 0

Re:NiBiTor v2.9a Feedback... - 2006/06/11 18:57 I got a XFX GeForce 7900 GTX which is set at 650/1600MHz and running now at 690/1680MHz. With NiBiTor v2.9 an v2.9a, I can't set a new memory timings, and test these. No possibilty to save. I got nvFlash v5.31 and I can flash a new BIOS in, but all got TimingSet 3 in BIOS.

| | The administrator has disabled public write access.

Capt_MonkeyBoy
User

Fresh Boarder

Posts: 8

Karma: 0

Re:NiBiTor v2.9a Feedback... - 2006/08/11 19:38 Hi, first have to say thanks for all your work with NiBiTor. I have a GeForce 7800G S+, and found another voltage option "?.?V", ID 00 and 01. I assigned it as voltage and set it up as a 3D voltage flashed the BIOS, but it didn't change the running 3D voltage, so I guess it's another name for 1.2V... Is that normal, a dead end option?

| | The administrator has disabled public write access.

Raptor
User

Platinum Boarder

Posts: 1092

Karma: 27

Re:NiBiTor v2.9a Feedback... - 2006/08/11 21:06 The "?.?V" is an uknown voltage, the only way for NiBiTor to make a educated guess is by extending the voltage table. Or by the voltage editor but even so its only a best guess and it and may not work...

| | The administrator has disabled public write access.

Capt_MonkeyBoy
User

Fresh Boarder

Posts: 8

Karma: 0

Re:NiBiTor v2.9a Feedback... - 2006/08/11 21:16 Would there be an entry if it wasn't an option? Also it annoys me how in anything where the graphics card is identified it says GeForce 7800 GS, no GS+. I changed the boot flash to say GeForce 7800 GS+ but how would you change it for everything?

| | The administrator has disabled public write access.

Mavke
Admin

Admin

Posts: 13453

Karma: 340

Re:NiBiTor v2.9a Feedback... - 2006/08/24 11:50 xennon wrote:
Hi, this is my 1st post on your cool site. My first and one-and-only problem is with NiBiTor v2.9a, because when I start the program only show its frame and nothing name its card nor voltage, tempeture and I didn't save its BIOS too.
Euh, quite a strange question you have. Of course when you just launch NiBiTor it will show all blank... It is a tool to backup and modify the BIOS, but you first need to backup the BIOS of course. So go to the Tools tab and use the Read BIOS function. Once you have save the BIOS to a file you can than open it in NiBiTor to check the details. Please also attach yoru BIOS so we can have a look.

| | The administrator has disabled public write access.

Mavke
Admin

Admin

Posts: 13453

Karma: 340

Re:NiBiTor v2.9a Feedback... - 2006/08/24 11:54 Delta wrote:
With NiBiTor v2.9 an v2.9a, I can't set a new memory timings, and test these. No possibilty to save. I got nvFlash v5.31 and I can flash a new BIOS in, but all got TimingSet 3 in BIOS.
As explained already quite often you can select the TimingSet you want to use! The TimingSet is specific per card, so what you need to change are the value reported on the active TimingSet. So in your case for changing the timings, you need to change the values of TimingSet 3.

| | The administrator has disabled public write access.

Mavke
Admin

Admin

Posts: 13453

Karma: 340

Re:NiBiTor v2.9a Feedback... - 2006/08/24 12:13 Capt_MonkeyBoy wrote:
Would there be an entry if it wasn't an option? Also it annoys me how in anything where the graphics card is identified it says GeForce 7800 GS, no GS+. I changed the boot flash to say GeForce 7800 GS+ but how would you change it for everything?
Well since the GS+ isn't an official extension, but something that Gainward invented to make the difference between the normal GS (G70 core with only 16 pipes) and the GS+ (G71 core with full 24 pipes). So as there is no ID to assigned by NVIDIA you can't make that change and it will always be seen as a GeForce 7800 GS, cause that is what NVIDIA has as AGP card based upon the GeForce 7800 core.

| | The administrator has disabled public write access.

<< Start < Prev 1 2 Next > End >>

Boardwalk :: Forum List NVIDIA Graphics Cards NiBiTor Software Feedback

Joomlaboard Forum Component 1.1.2 Stable
Two Shoes M-Factory

Compare Prices
Shopbot.ca LCD TV GPS Digital Cameras Mobile Phones Laptops LCD Monitors MP3 Players Appliances

New Reviews

	Gainward BLISS 9800 GX2 Dual-GPU Version
	PowerColor Radeon HD 3650 Xtreme Cooling
	Dragon Lasers Hulk Green Laser Technology
	Gainward BLISS 8800 GT 1GB Golden Sample
	Gainward BLISS 8400 GS 256MB DDR2 Board

New Previews

	NVIDIA GeForce 9800 GX2 Dual-GPU Version
	PowerColor Radeon HD 3850 Xtreme Edition
	PowerColor Radeon HD 2600 XT 256MB Card

Support Us

Support MVKTech in making a small donation:

MyPMS Professional

Inbox
	You have 0 new message(s).

Joomla! is Free Software released under the GNU/GPL License.